My Car Project

Well it has been a long time coming but it finally something to look at. The specs on the engine and drive train are below.
Then in the pages following I describe the various stages that I went through to turn this ole wreck into what it is today.

Engine:
'72 351 Windsor Block
'70 351 Windsor heads ported and polished and milled .020 for compression
Stock cast pistons
FRPP M-6250-A332 Cam dur. @.050 241 I/224 E and .472 I/.496 E
FRPP Double roller timing set
Comp Cams Magnum Roller tipped rockers.
'69-'70 C9OX "Shelby" lettered 351w alum intake
COBRA cast alum. valve covers.
Modified Heddman 302 headers to fit the 351 and the AOD.

Transmission:
93 Thunderbird AOD
All stamped drums
Sonnax A+ OD servo
4R70W wide ratio gearset
Silverfox performance Valve body
TCI Streetfighter Convertor
Built by ME!

Rear:
58 Ford Fairlane 9" housing
3.25 gears with traction lock (the wide ratio gearset in the trans. make up for this with out buzzing motor on the highway).